Received 11 July 2008; received in revised form 10 October 2008; accepted 11 November 2008.
Purpose
To demonstrate mitigation of the interplay effects of scanned particle beams and residual target motion within a gating window by increased overlap of pencil beams.
Methods and Materials
Lateral overlap was increased by increasing the pencil beam widths or by decreasing the distance between the pencil beams (scan grid). Longitudinal overlap was increased by reducing the distance between iso-range slices. For scanned carbon ion beams, simulation studies were performed and validated experimentally to determine the required parameters for different residual motion characteristics. The dose distributions were characterized by the maximal local deviations representing local over- and underdosage.
Results
For residual lateral motion, the local deviations were <5% for 2, 4, and 7 mm residual motion within the gating window for a 2-mm scan grid and pencil beams of 10, 14, and 18 mm full width at half maximum, respectively. Decreasing the iso-range slice distance from 3 mm to 1 mm effectively mitigated ≤10 mm water-equivalent range changes. Experimental data reproduced the simulation results.
Conclusion
In charged particle therapy with a scanned beam, interplay effects between gated beam delivery and residual target motion can be decreased effectively by increasing the overlap between pencil beams laterally, as well as longitudinally.
Reprint requests to: Christoph Bert, Ph.D., Gesellschaft für Schwerionenforschung, Abt. Biophysik, Planckstr. 1, Darmstadt 64291 Germany. Tel: (+49) 6159-71-1558; Fax: (+49) 6159-71-2106
Conflict of interest: The Moving Targets project at Gesellschaft für Schwerionenforschung was funded in part by Siemens Healthcare, Particle Therapy; E. Rietzel is an employee of Siemens Healthcare, Particle Therapy and is a Guest researcher at Gesellschaft für Schwerionenforschung.
ABSTRACT